Industrial Lab Equipment

We offer Laboratory Lyophilizer, which is housed in a super structure steel frame and mounted on swivel casters. This instrument is well equipped with Perspex see through lid, gasket and control instruments i.e. microprocessor based digital solid state temperature indicator, which is used for measurement of temperature and elective vacuum indicator. Our instrument is designed of hermetically sealed compressor and with 100 liters / min direct motor drive rotary vane type vacuum pump of double stage with air ballast having ultimate vacuum of less 50 microns in the system and 10 microns on pump head

Features:

• Temperature range (-) 40°C at ambient temperature of 20°C
• Condenser Trap: All non-magnetic stainless steel fabricated, argon welded, dished-bottom for complete effluent removal
• Refrigeration coils made of copper bonded to outside of condenser heavily insulated temperature is pre-set to (-) 40°C at ambient temperature of 20° C is maintained through microprocessor based digital temperature indicator
• Vacuum drum has 6 or 12 port manifold (main drying chamber) made of stainless steel non-magnetic grade with perspex top cover

 

Specification:

Cat. No.	Size & Temperature Range 0 to - 40°C
5079-01	Capacity 3.25 Liters approximately (for 6 tests)
5079-02	Capacity 5.25 Liters approximately (for 12 tests)
5079-03	Optional accessories
5079-04	Secondary Drying Unit (In-Built)
5079-05	Pre-freezing glycol bath (Temperature up to -30°C) Heat rack with 2/3 individually heated racks for accelerated freeze drying of small samples in bulk
5079-04	Secondary Drying Unit (In-Built)
5079-05	Pre-freezing glycol bath (Temperature up to -30°C) Heat rack with 2/3 individually heated racks for accelerated freeze drying of small samples in bulk
5079-05	Pre-freezing glycol bath (Temperature up to -30°C) Heat rack with 2/3 individually heated racks for accelerated freeze drying of small samples in bulk
5079-06	(Tray, Petri Dishes and Beakers etc. Adoptable to main drying chamber) Automatic Voltage Stabilizer Capacity:- 5 KVA

 

DB-5080: Lyophilizer (Freeze Dryer), Digital Microprocessor Based, Temperature range 0 to -70°C.

We provide Centrifuge Table Top that is used in medical, hospital, pathological, pathological & institutional laboratories and have a wide option of rotor head and adaptors. Our range is rugged and versatile unit and has speed regulator, digital speed indicator & 0- 60 minutes digital countdown timer. This centrifuge table top is also provided with additional features such as dynamic brake for quick deceleration & imbalance detector with cut off in case of uneven loads but without rotor heads.

 

Features:

• Step less speed regulator
• Safety Lid inters lock to prevent cover opening during centrifugation
• Digital speed meter and 0-60 minutes digital countdown timer
• Imbalance detector with cutoff

 

Specifications:

Max Speed	5600 RPM
Max RCF	3600
Max Cap	400 ml
Power Supply	220 V, 50 Hz. AC

Our DB-5020 B.O.D Incubator has dual display and microprocessor controlled with automatic voltage stabilizer. It also has a provision for data logging in personnel computer. The temperature displayed of incubator continued during the power failure, hence the actual temperature changes inside the chamber could be detected and appropriate action could be taken at stipulated time period regarding experiment under process (losses could b avoided).

 

Features:

• Dual Display and Microprocessor Controlled
• 4 Digit L.E.D. Display for Process Temperature and Set Temp
• Aforesaid control followed by 16 X 2 alphanumeric LCD
• Display to reveal the S.O.S. conditions in readable message as well as in audio & visual, i.e.: low alarm, high alarm, door opened and power failure
• Castor wheel mounted cabinet
• Double walled, inner chamber and selves made of S.S. and outer wall of M.S. sheet duly powder coated
• Triple walled fitted with air circulation fan to maintain the uniform temperature
• Inner glass door for the inspection of inner chamber
• Lock and key arrangement with door operated illuminated lamp
• Refrigeration unit is formed by ISI marked compressor
• Temperature from 5 to 50 with accuracy of .5.
• Most versatile for biochemical oxygen demand determinations.

 

Specification:

Cat. No	Super Deluxe Digital Model	Capacity	Volume
5020-01 5020-02 5020-03 5020-04 5020-05 5020-06	405 x 405 x 405 mm 455 x 610 x 410 mm 505 x 830 x 415 mm 570 x 875 x 550 mm 650 x 900 x 550 mm 700 x 900 x 650 mm	2.4 Cu. Ft 4.0 Cu. Ft 6.1 Cu. Ft 10.0 Cu. Ft 12.0 Cu. Ft 15.0 Cu. Ft	65 Liters 112 Liters 171 Liters 280 Liters 336 Liters 420 Liters

We are engaged in manufacturing and exporting wide range of Plant Growth Chambers, which are suitable for carrying out various experiments to study growth of plants and animals under controlled environmental conditions and incubation. The actual temperature changes inside the chamber and suitable action regarding experiment under process (losses could be avoided) can be identified as the temperature displayed constantly work during power failure.

 

Features:

• Dual Display and Microprocessor Controlled, humidity/Temperature
• Indicator-Cum-Controller
• 4 Digit L.E.D. Display for Process
• Temperature/Set Temp, and Process
• Humidity/Set Humidity.
• Aforesaid control followed by 16X2
• Alphanumeric L.C.D
• Display to reveal the S.O.S. conditions in readable message as well as in audio & visual, i.e.: low alarm, high alarm, door opened and power failure
• Castor wheel mounted cabinet, double walled, inner chamber and selves made of S.S. and outer wall of M.S. Sheet dirty" powder coated
• Triple walled fitted with air circulation Fan to maintain the uniform temperature and humidity
• Inner glass door for the inspection of inner chamber
• Lock and key arrangement with door operated illuminated lamp
• Provided with refrigeration system to control temperature range from 5 to 50 and humidity ambient to 95%
• Suitable for carrying out different quality control tests under controlled conditions of temperature and humidity
• Provision to set two different temperatures for day and night
• Exterior illumination with fluorescent tubes fitted on both sides of the chamber accounts for artificial day light, and the cyclic illumination conditions are regulated by automatic microprocessor based programmable timer when all the tubes are On temperature from 15 to 50 1 can be obtained
• Light intensity can be adjusted manually according to requirements
• Arrangements for increasing the humidity are provided and not for decreasing than the ambient condition
• To work on 220volts AC supply

 

Specification:

Cat. No	Inner Chamber Size W x H x D	Volume	Capacity
5037-01	570 x 875 x 550 mm	10.0 Cu. Ft	280 Liters
5037-02	650 x 900 x 550 mm	12.0 Cu. Ft	336 Liters
5037-03	700 x 900 x 650 mm	15.0 Cu. Ft	420 Liters
5037-04	775 x 900 x 775 mm	20.0 Cu. Ft	560 Liters
5037-05	825 x 1200 x 825 mm	30.0 Cu. Ft	840 Liters
5037-06	900 x 1720 x 800 mm	45.0 Cu. Ft	1260 Liters

We export Mortuary Chamber Digital that is dual display microprocessor controlled. Based on advanced technology, the temperature displayed remain continue during the power failure. In this process, the actual temperature changes inside the chamber could not identified and suitable action could be taken at appropriate time regarding experiment under process (losses could be avoided).

 

Features:

• Double-walled with steel panels for outer surface and stainless steel inner chamber with insulation in between, front opening hinged insulated doors lined with magnetic gasket, handle and lock arrangement with keys in duplicate for individual dead travel o rollers fitted with ball bearings for easy movement
• Exterior surface is chemically treated, against coated and duly finished with hammer tone paint
• To avoid any moving part in side the cabinet for easier maintenance and cleaning viewpoint, refrigeration unit is kept outside the chamber and fixed at near top
• Refrigeration unit is formed by ISI marked hermetically sealed compressor

 

Specification:

• 4 Digit L.E.D. Display for Process
• Temperature and Set Temp.
• Aforesaid control followed by 16 X 2 alphanumeric LCD
• Display to reveal the S.O.S. conditions in readable message as well as in audio & visual, i.e.: low alarm, high alarm
• Door opened and power failure as a safety device in the event of fluctuation exceeding permitted tolerance
• Temperature is maintained with to 5 or 5 to 0 ( ordered)
• Supplied complete with trays, cord and plug
• Suitable to work on 220 volts AC

 

Available in following capacities:

• Available in Temp. Ranges: -2°C to 5°C, - 15°Cto-20°C,
• Available in Body Capacity: Single body, two bodies, three bodies, four bodies, six bodies.

Catering to the needs of various laboratories, we offer Universal Oven (Memmert Type) with microprocessor based PID temp. The controller is sturdy double walled units with outer chamber made of M.S. sheet duly enamel with inner made up of S.S. sheet. The gap inner of oven and outer chamber is filled with high grade glass wool to avoid thermal losses.

 

• Beaded heating elements of oven are placed in ribs, at and sides
• Inner chamber is provided with ribs for adjusting perforated shelves to convenient height
• Temperature is controlled by processor based digital PID
• Temperature controller from 50° C to 250 CD 1°C
• All digitally controlled ovens are fitted with air fan as a standard accessory

 

Specification:

Inner Chamber Size	Capacity
Width x Depth x Height
300 x 300 x 300 mm	28 Liters.
355 x 355 x 355 mm	45 Liters.
455 x 455 x 455 mm	95 Liters.
455 x 455 x 605 mm	125 Liters.
605 x 605 x 605 mm	224 Liters.
605x455x910 mm	252 Liters.
605x605x910 mm	336 Liters

Our Horizontal High Pressure Cylindrical Steam Sterilizer is designed in line with international quality standard. The space between the MBER, steam jacket, outer chamber and boiler are made of heavy gauge stainless steel with leak proof argon arc welding. This equipment is available in various specifications to meet the requirements of clients.

 

Features:

• Lid is made of thick S.S. plate
• All units are hydraulically tested up to 40 PSI
• The space between the outer chamber s filled with asbestos sheet or glass wool to minimize thermal losses
• Steam boiler is fitted with water level indicator, pressure cut-off device and automatic pressure control device
• Fitted with vacuum breaker to break vacuum in case of formation steam condensation
• Two separate valves are provided for evacuating steam from inner chamber and jackets as and when d with digital temperature indicator and automatic vacuum breaker
• Fitted with digital temperature indicator-controller, with steam jacket and separate boiler
• Sterilization cycle is controlled by multi-port valve and the unit is fitted with all as automatic pressure control switch and automatic low water cut-off device.
• To work on 440 Volts, 3 phase supply

 

Specification:

Size in mm	CAPACITY	Load	With Outer S.S. (1)
Dia x Height		KW
400 x 600 mm	88 Liters.	6.0
400x 1100 mm	162 Liters.	9.0
500 x 900 mm	165 Liters.	9.0
500 x 1200 mm	221 Liters.	9.0

We offer Laminar Flow Cabinet that is available in various models such as 5511-01, 5511-02, 5511-03, 5511-04 and 5511-05. This cabinet is available in several specifications to meet the requirements of US federal standard 209 B (BS 5295). It provide particle free air to meet class 100 (class cabinets are fabricated out of thick board duly sun mica clad. The interior surface of cabinet is epoxy painted to ensure longer service life.

 

Features:

• The work lick board which is sun mica clad at top.
• Side panels are made out of thick transparent plexi glass duly framed
• The unit is strand is made to pass through highly effective HEPA (high efficiency particular air) filters having efficiency rating as high cold DOP and 99.97% with hot DOP thus retaining all air-borne particles of size 0.3 micron and larger
• Using a dynamic wer and motor assembly is statically and dynamically balanced ISI Marked motor of 1/5 H.P. capacity operates with evel.
• The working area is illuminated by fluorescent lighting fitted to the unit
• Height of the working table provides'^ DOWN" working position for the operator
• To work on 220/230 volts AC supply
• Supplied complete with sun mica table top
• Filter and fluorescent illumination.

 

Specification:

Cat. No.	5511-01	5511-02	5511-03	5511-04	5511-05
Working Size	2'x2'x2'	3'x2'x 2'	4'x2'x 2'	6'x2'x2'	8'x2'x2'
Size of HEPA Filter	2'x2'x 6"	3'x2'x 6"	4'x2'x 6"	3'x2'x 6"	4'x2'x 6"
No. of HEPA Filter	1	1	1	2	2
Illumination	1x20w	1x20w	2x40w	2x40w	4x40w

 

Specification of DB-5560 Rotap Sieve Shaker:

• Designed to carry up to 7 sieves of 8" dia it is driven by 1 / 4 HP electric motor, through reduction gear
• The whole gear mechanism which gives circular end to end motion runs in an oil bath
• The tapping motion is given by hammer from top
• To work on 220/230 volts single phase A.C.
• Supplied complete with adaptor for 8" sieves but without test sieve
• Fitted with AUE/GE/compton/equivalent motor

We offer Rotap Sieve and Rotary Flask Shaker, which is made to carry up to 7 sieves of 8" dia it is driven by 1 / 4 HP electric motor, through reduction gear. Based on advanced technology, the whole gear mechanism of shaker provides circular end to end motion runs in an oil bath. From top, the tapping motion is given by hammer. Our rotap sieve and rotary flask shaker work on 220 / 230 volts single phase A.C and supplied complete with adaptor for 8" sieves but without test sieve.

 

Features:

• Fitted with AUE/GE/Crompton/Equivalent Motor
• Shakers are for applications demanding continuous operations
• Supplied with stainless steel platform with lotus clamps for meyer flasks
• Fitted with PMDC heavy duty continuous rating motor
• Speed is controlled through a SMPS based DC drive unit control knob or through a variac (Auto Transformer)
• Speed range is from 50 to 250 RPM (Approx.)
• Fitted with digital meter
• Any one set of lotus clamp for the above configuration is supplied with the above unit
• Additional set of lotus clamps are at extra cost
• Fitted with digital on/off timer for shaking time control
• To work on 220 Volts AC supply

 

Specification:

Platform Size			Flask Holding Capacity
	1000 ml.	500 ml.	250 ml.	150 ml.	100 ml/50 ml.
24 x 24 Inches	16	25	36	49	64
36 x 36 Inches	36	49	64	81	100
48 x 48 Inches	81	100	121	144	169

Avail from us highly advanced Temperature Controller, which has light weight with ceramic fiber wool insulation (instead of brick insulation). The outer casting of temperature controller is made of double walled thick reattached with thick perforated sheet on the bottom portion, painted with attractive stove enamel. Our range is appreciated for accurate measurement and widely preferred in laboratories.

 

Specification:

Heating Elements

• KANTHAL "A-1"wire and backed by high temperature ceramic wool insulation, which avoids loss of energy
• Temperature fitted in of furnace with two pilot lamps
• The apparatus is complete with one Silver thermal fuse, main lead with power work on 220/230 volts or 400/440 volts A.C., fitted with microprocessor based digital temperature Indicator-cum-controller maximum temperature is 950°C and working temperature 900°C
• For model of higher temperature the maximum temperature is 1200°C and working temperature1100°C
• Working Temperature available: 900°C, 1000°C, 1150°C
• Available Size: 100x100x225 mm, 125x125x250 mm, 125x125x300 mm, 150x150x300 mm, 200x200x300 mm" 125x175x350mm, 175x175x475mm, 225x225x450mm

We offer Multi Magnet Stirrer which is available with digital R.P.M meter. Based on cutting edge technology, this compact designed stirring device utilizes a rotating magnetic field. A magnetic field is created by a permanent magnet that induces variable speed stirring action. The stirring is completed with the helps of small Teflon rotor, which when placed in the liquid to be stirred. It is capable of rotation by magnetic field applied from below the container. The unit is installed with pilot lamp and available in manifolds of 3/6 units with individual controls. Our range is highly efficient and work on 220/230 volts AC.

 

Features:

• Consistent performance
• Long service life
• Easy to operate

 

Specification:

Capacity

• 4530-01 3 Stirrers of capacity 2 Liters (With Hot Plate)
• 4530-02 6 Stirrers of capacity 2 Liters (With Hot Plate)

We provide Deep Freezer Digital, which is fabricated using quality tested raw material. The temperature displayed continues during the power failure to identify the actual temperature changes inside the chamber and suitable action could be taken at appropriate time regarding experiment under process (losses could be avoided).

 

Features:

• Dual Display and Microprocessor Controlled
• 4 Digit L.E.D. Display for Process
• Temperature and Set Temp.
• Aforesaid control followed by16X2 alphanumeric LCD
• Display to reveal the S.O.S. conditions in readable message as well as in audio & visual, i.e.: low alarm, high alarm, door opened and power failure
• Castor wheel mounted cabinet
• Double walled, inner chamber and selves made of S.S. and outer wall of M.S. sheet duly powder coated
• Triple walled fitted with air circulation fan to maintain the uniform temperature
• Inner glass door for the inspection of inner chamber lock and key arrangement with door operated illuminated lamp
• Refrigeration unit is formed by ISI marked hermetically sealed compressor
• Temperature from ambient to -20 with accuracy of.5
• Vertical models are supplied with three stainless steel storing shelves

 

Specification:

• Available in Temp. Ranges : Ambient TO -20°C , Ambient TO -40°C , Ambient to -70°C
• Available in Sizes / Capacity/Volume : 3.4 Cu. Ft, 95 Ltrs., 4.0 Cu. Ft. 116 Ltrs., 6.1 Cu. Ft. 171 Ltrs., 10.0 Cu. Ft. 280 Ltrs., 12.0 Cu. Ft. 336 Ltrs.

Our Humidity and Temperature Control Cabinet is provided with refrigeration system to control temperature range from 10 to 50 and humidity 55% to 95% %. Designed in line with international quality standards, our range is ideal for ferrying out different quality control tests under controlled conditions of temperature and humidity.

Features:

• Dual Display and Microprocessor Controlled, humidity/Temperature
• Indicator-Cum-Controller 4 Digit L.E.D.
• Display for Process Temperature/ Set Temp, and Process Humidity/Set Humidity
• Aforesaid control followed by 16 X 2 alphanumeric LCD
• Display to reveal the S.O.S. conditions in readable message as well as in Audio & Visual, i.e.: low alarm, high alarm, door opened and power failure
• More over the temperature displayed would be continued during power failure, so that one could know the actual temperature changes inside the chamber and suitable action could be taken at appropriate time regarding experiment under process (losses could be avoided).
• Castor wheel mounted cabinet, double walled, inner chamber and selves made of S.S. and outer wall of M.S. Sheet duly powder coated. Triple walled fitted with air circulation Fan to maintain the uniform temperature and humidity
• Inner glass door for the inspection of inner chamber. Lock and key arrangement with door operated illuminated Lamp.

 

Specification:

Inner Chamber Size WxDxH	Capacity	Volume
455 x 710 x 455 mm	147 Liters	5.25 Cu. Ft.
605 x 605 x 605 mm	225 Liters	8.00 Cu. Ft.
605 x 910 x 605 mm	335 Liters	12.00 Cu. Ft.

We manufacture Seed Germinator that has a provision for data logging in personnel computer. Our range is available in various specifications and configurations to meet the requirements of clients. This equipment is widely acknowledged for accurate measurement and widely used in laboratory. Our seed germinator is ideal for conducting various experiments on a variety of seeds under different conditions of temperature and humidity. Through this equipment, atmospheric conditions are created within the chamber to perform various experiments without going onto the field. It is provided with 14 adjustable perforated trays.

 

Features:

• Dual Display and microprocessor controlled
• Humidity/temperature indicator-cum-controller
• 4 Digit L.E.D. Display for Process
• Temperature/Set Temp, and Process humidity
• Aforesaid control followed by 16X2 alphanumeric LCD
• Display to reveal the S.O.S. conditions in readable message as well as in audio & visual, i.e.: low alarm, high alarm, door opened and power failure
• Temperature displayed would be continued during power failure, so that one could know the actual temperature changes inside the chamber and suitable action could be taken at appropriate time regarding experiment under process (Losses could be avoided)
• Castor wheel mounted cabinet, double walled, inner chamber and selves made of S.S. and outer wall of M.S. Sheet duly powder coated. Triple walled fitted with air circulation Fan to maintain the uniform temperature and humidity
• Inner glass door for the inspection of inner chamber
• Lock and key arrangement with door operated illuminated lamp
• Provided with refrigeration (ISI Marked Compressor) system to control temperature range from 5 to 50 and Humidity (Not Adjustable) is created in a S.S. water reservoir fitted at the bottom to provide 90% to 95% 3% RH humidity
• Complete with cord and plug to work on 220/230 VA.C

We export Metabolic Shaker (Water Bath Incubator Shaker) that is widely used in various laboratories. The inside part of the shaker is made of S.S sheet and outer part is enamel painted with M.S sheet. Our range is available in different specification to meet the requirement of clients. We provide customization on our range as per the specification of clients.

 

Features:

• The Pyramid of condensed water droplets on the specimens
• Heating is achieved through a immersion type heater by microprocessor based digital temp
• Indicator-cum-Controller with an accuracy of + 0.2°C. The bath ball rollers oscillated through a geared variable speed motor
• Shaking speed ranges between 40 to 140 can either hold test tubes or Erlenmeyer flasks of 25 ml or 50 ml or100 ml or 250 ml or 500 ml or 1000 ml. mention the capacity of the flasks while ordering)
• Supplied complete with one shaking tray, on 220/230 volts A.C. supply
• Available with heating arrangement only (having temperature range from; sating and cooling arrangements (having temperature range from 5°C to 100°C)

 

Specification:

Inner Bath Size	CAPACITY	TEMP. AMBIENT TO
WxDxH	in Liters	100°C (1)
275x275x 150 mm	12
405 x300 x 150 mm	18

Our Vacuum Oven is available in various capacities ranges from 12 liters to 43 liters. This oven is developed using quality tested raw material to ensure long service life. The outer part is made of M.S sheet, which is duly enamel painted and inner part is made up of heavy gauge S.S sheet. To avoid thermal loss, the gap of two walls is properly filled with high grade glass wool.


Features:

• Temperature range from 50° C to 150° C is Controlled Processor Based Digital
• Temperature Indicator-Cum-Controller with an accuracy of ± 1°C.
• It is capable of withstand
• Provided with vacuum gauge, see through transparent window of toughened glass and one shelf
• To work on 220/2

Specifications:

Inner Chamber Size Dia x Depth	Capacity
250 x 300 mm	12 Liters
300 x 300 mm Round	17 Liters.
300 x 600 mm Round	43 Liters.
250 x 250 x 250 mm Rectangular	16 Liters.
300 x 300 x 300 mm Rectangular	28 Liters.
455 x 455 x 455 mm Rectangular	95 Liters.